Everything Presence One: mmWave presence sensor for Home Assistant
An open ESPHome presence sensor that combines mmWave, PIR, light and temperature/humidity sensing in one small case.
Photos
Photos: Everything Smart Home
Key Facts
- Chip: ESP32
- Sensors: mmWave, PIR, illuminance, temperature/humidity
- Firmware: ESPHome
- Integration: Home Assistant
About This Project
The Everything Presence One (EP1) is a smart-home presence sensor from Everything Smart Home. It pairs a mmWave radar, which notices people even when they sit still, with a PIR motion sensor, an illuminance sensor and a temperature and humidity sensor. It runs ESPHome on an ESP32 and integrates directly with Home Assistant, and the repository holds the official ESPHome configurations, including variants for different mmWave modules. The sensor ships as a kit you assemble: the board slides into the case, the PIR and mmWave modules plug in, and a ball-joint stand mounts it. The official user guide covers setup and Wi-Fi connection.
Source & Attribution
AI-generated render based on project photos
Available as a complete kit
mmWave presence sensor kit with ESPHome
Related Projects
